By Jocelyn Ian
Plastering is a great way to update the look of your home without breaking the bank. However, planning a plastering job can be intimidating if you are a novice. Here are some tips to help you plan a plastering job in your home.
Set Realistic Goals
Before starting a plastering job, it is important to set realistic goals. If you have never plastered before, do not plan on plastering an entire room in one day. Take things slow and steady and work on small areas at a time. It will not only make the job easier, but it will also ensure that you achieve the desired results. Once you are ready, you can visit P1 Plastering Superstore and get everything you need to complete the plastering job at home.
Prepare The Surface
Preparation is key to achieving a smooth and professional-looking finish. The surface you will plaster needs to be clean, dry, and free from loose debris or paint. If you are plastering over a painted surface, use a scraper to remove loose or flaking paint. You can also use sandpaper to roughen up the surface, which will help the plaster to adhere better.
Choose The Right Plaster
Many different types of plaster are available on the market, each with its unique properties. It is important to choose the right kind of plaster for the job at hand. For example, if you are plastering a bathroom or kitchen, you must use a moisture-resistant plaster. If you are plastering over an existing surface, you may need a bonding.
Measure Accurately
It is important to measure the area that you will plaster accurately. It will ensure that you order the right amount of plaster and do not waste any. To calculate the amount of plaster you need, measure the height and width of the area, and multiply the two numbers together. Then, consult the packaging of the plaster that you have chosen to determine how much you will need per square foot.
Mix The Plaster Properly
Mixing plaster is a crucial step in the plastering process. If the plaster is not mixed properly, it will not set correctly and adhere properly to the surface. To mix the plaster, add it to water slowly, stirring constantly. You must add the plaster to the water and not the other way around. Continue stirring until the plaster is smooth and creamy.
Apply The Plaster In Layers
Plastering is done in layers, each needing to dry completely before the next layer is applied. It is important to follow the manufacturer’s instructions for the plaster you use, as they may have varying drying times. Applying too much plaster in one layer can cause it to crack as it dries.
Smooth Out The Plaster
After each layer of plaster has been applied, it is important to smooth out the surface. You can do it using a trowel or a float. Start at the top of the surface and work your way down, applying even pressure to ensure the surface is smooth.
Sand The Surface
Once the final layer of plaster has been applied and has dried completely, it is time to sand the surface. Use sandpaper to smooth out any rough spots or imperfections.
These are the basic steps to plastering at home, and you can click here to get more advice for novice plasterers.
